ACTUMATIC® fulfills all demands on control of electric actuators
deriving from the various types of valves. ACTUMATIC® is integrated
in the actuator as a modular designed system component. The actuator
controller is easily adapted to the requirements of the actual positioning
element. The control behaviour of the electric actuator is set by
configuring ACTUMATIC®. Without wiring changes and without having
to define the exact circuitry already at the beginning of project
engineering. Settings are made easily and quickly on-site by setting
DIP-switches on the logic board PAL (Programmable Actuator Logic).
Monitoring functions and status displays facilitate start-up, optimize
maintenance and thus guarantee reliable operation.
Advantages from using ACTUMATIC®
- Cost savings in planning
- Flexibility in engineering
- Cost savings in cabling and installation
- Less logistics cost
- Cost savings in maintenance
- Flexibility with changes and extensions
Functionality
- Motor control
- Phase-sequence monitoring/Phase loss monitoring
- Behaviour in case of end positions for travel and torque can
be set
- Function monitoring
- Signalling
- Selection of behaviour in case of failure
- Diagnostics without additional diagnosis device
- Customer-specific solutions programmable
User setting of actuator configuration
The logic control sequences are factory-programmed in
a PLD (Programmable Logic Device) on the logic board PAL. This factory-programming
comprises modes of operation, resulting from combinations of positioning
elements and electric actuators, most frequently used in practice,
as a standard version. By setting the DIP-switches "Parameters"
(see list of parameters) on the logic board PAL the required actuator-specific
motor control settings as well as the variants of processing of
end position and control signals are selected. Special requirements
on actuator control can be realised by customer-specific programming
of the PLD control logic.
|
